This thing was constructed on May 23, 2007, and it was categorized as Brands, Product Announcements.
You can follow comments through the RSS 2.0 feed. You can leave a comment, or trackback.

Lunar Simulator LED Neptune Systems

Lunar Simulator LED Neptune Systems LEDS

Don’t have enough moon lighting in your tank? You might be interested in the Lunar Simulator (LS) which allows the AquaController to control and vary the intensity to a 2 to 5 LED module for a realistic moon cycle simulation. The LS uses high intensity LEDs with a wide angle lense (100+ degrees) to provide the best possible coverage.
Features:
High intensity LEDs with a wide angle lense (100+ degrees) to provide the best possible coverage.
High reliability direct wired control connection to the AquaController.
User configurable maximum LED intensity.
User configurable control address.
The AquaController dims the LEDs in phase with the true lunar cycle.
Can be purchased with 2 to 5 LEDs.
2 Mounting Holes on Lunar Simulator and LED modules for easy installation.

The Lunar Simulator should be screwed onto a wall or cabinet in a dry location so that water damage is not possible. Available from your LFS or online for under $100.

Read

Other items you might enjoy:

This post was written by .



One Trackback

  1. Posted August 31, 2008 at 8:12 pm | Permalink

    [...] seems competition is a good thing after all. Neptune systems, makers of the Aqua Controller line of units including the Aqua Controller Jr, Aqua Controller 3, [...]

Post a Comment

Your email is never published nor shared. Required fields are marked *

*
*