[cbui2]

5-18: ok finished LA3 rack and additional modifications was added to secure all fixtures. 1st 1.5" x 1/8" thick aluminum angle was the main support to hold LA3 in place. 2nd 2x4 was added to top, back and sides to support the entire light canopy making it slides so much easier since the 3/4" plywood was removed due to any heat build up therefore making it lighter. 3rd 1" x 1/8" thick aluminum angle and 1x2 white pine was added to support the LM3 from moving no more than 1/8" either way so MH fixtures would not fall down while sliding rack is in motion. 4th LA3 will also be secure from the top just in case fixtures do ever fall down and hopefully it will not get that far.