5-30: Ok here are some more updates, and manage to get some work done after coming home. sod was removed all along the wall. using 2x4 w/3" wood screws to support the outer wall and 2x6 for inner. This was much better to support than the regular stakes sold at HD, also foam expansion joint boards will be used along the back wall and step. next brick will be spreaded out evenly at the bottom to raise wire mesh up in place than rebar will be place above the mesh which will be tied together to make it more durable since generator and chiller will add about 1500 lbs. slope is from back to front making sure so no puddles are visible and of course mosquito heaven too. slab area is 12'L x 38"W and approximately 6"-7" of concrete will be poured using concrete mixer which holds about 5 80lbs bag.
