Time for a Little Do-It-Yourself Modifications: Making Some Space
Due to my recent addition of the Tunze Nano DOC 9002 Protein Skimmer which has been one of the most beneficial upgrades to my JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium. However, in the process of solving one problem another problem managed to show itself. How about that for Murphy's Law? Even though the Tunze Nano DOC 9002 Protein Skimmer main body was able to just barely squeeze into the Center Baffle of the Rear Chamber of the JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium the collection cup was too large and occupied a substantial amount of real estate that caused me to have to disconnect the stock Integrated Hood to accomodate for the Collections Cup's space requirements.
Photograph - The Tunze Nano DOC 9002 Protein Skimmer Collection Cup occupying just a little more space then I had hoped for.
Photograph - The stock Integrated Hood of the JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium disconnected from the latches and hanging about 0.5 inch over the front of the Aquarium edge allowing light to spill out. Not the prettiest site especially with someone who has Obsessive Compulsive Disorder such as myself.
Now a couple of choices were available as possible resolutions for this issue. First solution would be to remove the stock Integrated Hood and purchase a pendant, hanging or bracket mounted Metal Halide Lighting System to replace the Integrated Hood. This option was indeed to most expensive and would wast a perfectly functioning Reflector, Electronic Ballast, and Moonlights. So I opted out of choosing this option. Second solution would be to get alittle creative and break out some tools without loosing an eye or finger in the process and reminding my wife that she cannot drive without a license and that the hospital is just a cab ride away! Plus this would save me money so that I could spend it on another form of equipment for my hobby. So I choose option two.
Here was the gameplan, I was going to use my Cordless Titanium Dremel tool in order to accurrately create an opening in the rear of the Integrated Hood so that it can be connected back to the latches while allowing suffiicient space for the Tunze Nano DOC 9002 Protein Skimmer Collection Cup to sit properly. I measure approximately 4 inches in Width x 0.75 inch in Depth in order to accomplish the end product. I made sure our son was out of the room and yes I wore safety goggles even though I didn't photograph them and went to work.
Photograph - The Cordless Titanium Dremel tool that will help me save some money and maybe lose a finger.
Photograph - The Integrated Hood disconnected entirely from the JBJ 28 gallon Nano Cube HQI Reef Aquarium.
Photograph - My work in progress no I just have to smooth the edges and clean up the mess before my wife yells at me that were having company over.