A More Detailed Look at Weekly Water Changes.
Hello everyone, I just thought I would go into a bit more detail on the processes that are included in the weekly water changes for my JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium. As I have stated in previous post, the world of Nano Reef Aquariums is not forgiving in making honest mistakes or miscalculations which in the most minuscule amount can have devestating effects on the specimens your care for. This in turn means that I must pay careful attention to parameters of the newly mixed Saltwater as oppossed to the Saltwater already within the Nano Reef Aquarium.
Reverse Osmosis/Deionization or RO/DI Filtration
Well everything has to start somewhere and our first task is to ensure that nothing but the purist water possible can be used to in addition to a quality salt mixture. In order to do this I incorporate a Reverse Osmosis?Deionization or RO/DI Filtration System to purify the tap water coming from my bathroom faucet. Now some people might not now exactly what an RO/DI Filtration System is and how it works so here is a detailed explination. Water coming from you faucet has been chemically treated in order to bring it to any acceptable level for human consumption. Chemicals contained within the water can be anything from Flouride or Phosphates and here a kicker Arsenic. Well to be short about it their are many chemicals that vary from location to location that we do not want in our Aquariums. An RO/DI unit such as mine passes tap water at high pressures through Prefilters developed to chemically remove impurities (Carbon Prefilter) larger Solids (Sediment Prefilters and eventually extremely small solids (Reverse Osmosis Membrane) and finally removing the last amount of impurities both described as a chemical and mechanical filtration method (Deionization Canister) and into your bucket. Resulting in Freshwater that is reffered to as pure or scientifically have the least amount of Total Dissolved Solvents or TDS. Waste water is a byproduct of the filtration at a ratio of 1 gallon of purified water to an average of 4 gallons to 5 gallons of waste water which is expelled from the system at the Reverse Osmosis Membrane.
Notation: All Reverse Osmosis/Deionization Filtration Systems have a Reverse Osmosis Membrane labeled with a Gallons Per Day rating on them. This does not mean that you can leave your unit on for 24 hours and produce for example 75 gallons of Purified Freshwater on a system rate for 75 gallons per day. This means that your unit can process 75 gallons of water in that day which include both purified water in combination with waste water.
Photograph - A standard Reverse Osmosis /Deonization Filtration System with Carbon and Sediment Prefilters rated at 75 gallons per day.
In order to confirm that level of Total Dissolved Solvents of the purified water a hand held TDS Meter or Inline TDS Meter is required. This device works by measuring the electrical conductivity of the purified water by passing electrical current from one prong and receiving/measuring it at the other prong. The closer the reading is to 000 the more pure that water. This device can also ensure that your Reverse Osmosis/Deionization Filtration System is functioning properly.
Photograph - Hannah TDS Meter measuring the purity of the water.
Notation: Please ensure that your TDS Meter prongs are submerged in the water you are measuring the purity of. The photograph above was take for viewing purposes only. Also it is impossible to get the TDS Reading of saltwater so don't be alarmed if you place the TDS Meter in saltwater and the reading goes off the chart.
Mixing Synthetic Sea Salt for the Nano Reef Aquarium
Now this section is not meant to start a debate on what manufacturer of Synthetic Sea Salt will provide the optimal results for a Nano Reef Aquarium. Since I started in the Reef Keeping Hobby I was an avid Instant Ocean preffered hobbyist. But recently I have switched to Kent Marine Synthetic Sea Salt and I am quite pleased with the results so far. I measure my Kent Marine Synthetic Sea Salt at approximately 2.5 cups for 5 gallons of Freshwater which results in a Salinity Grade of 1.026 Salinity Grade or 35 Parts Per Thousand. I personally found standing at the bucket with a stick manually mixing the salt to be quite time cosuming. So I moved to a more aumated method incoporating a Mag-7 Water Pump to do the mixing for me. I also use a 200 watt Marineland Visi-therm Stealth Heater to match my Nano Reef Aquarium Water of 76 Degrees Fahrenheit and a Coralife Digital Thermometer to see when the temperature is an exact match.
Photograph - Kent Marine Synthetic Sea Salt Mix. The bag include a sealing mechanism like a Ziplock which is worth the high price itself. the seal it creates is airtight which ensure that your Synthetic Sea Salt Mix will not get clumpy from absorbing excessive moisture.
